Terms and ConditionsWebsite disclaimer and conditions of use
The pages (“the Website”) are published by Thormac.
Please read this disclaimer and our terms and conditions of use carefully as by using the Website you will be taken to have agreed to be bound by them. We reserve the right to vary the conditions of use at any time and will post any variations here. You are advised to review the terms and conditions of use on a regular basis as you will be deemed to have accepted variations if you continue to use the Website after they have been posted.
We have provided the contents of this Website for your information only. The distribution of information on the Website may be restricted by local law or regulation in certain jurisdictions. This information is not intended for distribution to, or use by, any person or entity in any such jurisdiction and persons accessing these pages should inform themselves about and observe any such restrictions. If you are in any doubt as to whether this Website can be lawfully used by you please do not proceed further.
Information published on the Website is supplied by Thormac and, where indicated, by certain third parties. We take every care and precaution to ensure that information published on the Website is accurate when posted and regularly updated, but we cannot guarantee its accuracy and may change the information at any time without notice.
We are not responsible for the content of any other website from which you have accessed the Website or to which you may hyperlink from the Website and cannot be held liable for any loss or damage you incur as a result of your use of any other website from which you hyperlink to or from the Website.
This Website is established in Ireland in accordance with the laws of Ireland and will be governed by the laws of that country. When you use the Website, you accept that your use of the Website and any information on the Website, will also be governed by the laws of Ireland and if any claim or dispute arises from your use of the Website or any of the information on it, you agree that the Irish courts will have exclusive jurisdiction over all such claims or disputes.
No third party is permitted to link any other website to this Website without obtaining our prior written consent.
WE PUBLISH THE WEBSITE “AS IS” WITHOUT ANY WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE OPERATION OF OUR WEBSITE, THE ACCURACY OF THE INFORMATION OR THE PRODUCTS OR SERVICES REFERRED TO ON THE WEBSITE (IN SO FAR AS SUCH WARRANTIES MAY BE EXCLUDED UNDER ANY RELEVANT LAW) AND SHALL NOT BE LIABLE FOR ANY LOSSES OR DAMAGE THAT MAY RESULT FROM USE OF THE WEBSITE AS A CONSEQUENCE OF ANY INACCURACIES IN, OR ANY OMISSIONS FROM, THE INFORMATION WHICH THEY MAY CONTAIN.
Save where otherwise indicated, the contents of all the pages contained in this Website are the copyright material of Thormac.
Unless specifically prohibited by a notice published on any page, you may make a print copy of such parts of the Website as you may reasonably require for your own personal use provided that any copy has attached to it any relevant proprietary notices and/or disclaimers. All other use is prohibited. Content and information provided by third parties other than Thormac is identified clearly where it appears. We publish this content as supplied to us and are not responsible for its accuracy or timeliness. You must take appropriate steps to verify this information before acting upon it.
Whilst Thormac makes every effort to maintain the security and integrity of electronic transmissions through our server, please be aware that any information transmitted to or from Thormac by email or otherwise via the internet may be subject to interference by third parties and/or incorrectly delivered or delayed.
E-mail is not a confidential communication channel. Any information sent by e-mail or via the internet is entirely at your own risk. Your acceptance of this risk will be deemed to have been given by your use of e-mail to transmit information to and/or your election to receive information from Thormac through these means.
α-S100iA IS330. It will be with us by October!Repeatability you can rely on.No matter how many parts you produce using FANUC ROBOSHOT, injection speeds always remain constant, guaranteeing you extremely high levels of consistency and accuracy. The New machine will...
AIX 2020 CANCELLED Due to the ongoing Corona Virus global crises the AIX 2020 has been postponed until further notice. In a statement on the AIX website the organisers have stressed due to the Covid-19 outbreak it was necessary to postpone the event: "the Passenger...
Thormac, one of Ireland's leading contract plastic injection moulding companies will be exhibiting at the AIRTEC show in Munich Germany on the 14th. and 15th. of October. The Show demonstrates the entire aerospace supply chain from design, engineering, testing,...